Large
Cross Concrete or Plaster Mold
Approximately
12" Wide X 16" Long X 2" Thick
Vertical is 3" wide and horizontal cross bar is 3" wide
These
molds are made from durable
heavy duty .093 ABS which is thicker than our normal molding material
due to the extreme stretch that the plastic has to make in the inside
corners of the cross arms where they meet. Those points get very thin
so care should be taken to not over stress those areas for the molds
to last. Generally not a problem, just don't abuse them and they will
last a very long time.
Note:
all measurements in US Inches
Item # CON-084
$14.95
This
Large Cross mold can be used for casting plaster or concrete. It has
a rather wide and stout structure for use as a concrete item for exterior
use. Strong enough to be used as a pet marker or for placement as a
roadside marker. Great for stained glass or other imbedding type molding.
A piece of rebar could be cast into the concrete while making this Large
Cross to facilitate mounting the finished cross upright in the ground,
or wire can be cast into the backside while casting it so it can be
wired to a post or stake at any location.
PLEASE
SEE SHIPPING RATES AND TERMS. Shipping
Rates & Info
ORDER
SECURE USING
|
